Purdue was playing Notre Dame the day I arrived, at 2am local time on a Sunday. I happened to be up, so I scanned the TV channels here at the hotel and didn’t see the game. I then picked up my phone and headed over to Twitter, and there it was: commentary from the same people, all around the US, that I talk Purdue football with every weekend. An ocean, 4000 miles, 7 time zones, and a different language and I was still able to experience the Purdue game as it happened.

The internet has also made it incredibly easy and cheap to call home. Using my Google Voice number, a 30 minute call only cost $0.60. Not only that, but the call was crystal clear, and had no lag at all. This is something that 50 years ago would have cost several dollars per minute, required an operator to complete the call, and would require waiting for an open phone line across the Atlantic. 150 years ago it was absolutely impossible. You would have to write a letter, send it off, and wait for a response to come back in no less than a month.

The pace at which technology advances on the internet is astonishing. Being on the leading edge of that wave is a lot of fun, but you don’t realize just how incredible it is until you see just how small it can make the world feel when you’re in an unfamiliar place and it still allows you to connect with friends and family just as easily as if you were there.

Bonus Tip: You can use Google Docs from your phone. Any phone can view documents, and some higher end phones can even make edits to documents.

Matthew Walsh
(address removed
for privacy)

March 15, 2009

Federal Trade Commission
Consumer Response Center
600 Pennsylvania Avenue N.W.
Washington, DC 20580

Dear Sir or Madam:
I recently purchased a computer from Dell Inc. (One Dell Way, Mail Stop 8129, Round Rock, TX 78682). Two weeks after I placed my order they informed me through email that my order would be delayed another week. At the end of this week, they again informed my via email that my order would be delayed another week. This email also mentioned the FTC “Mail Order Rule” (Part 435) and gave me until 9pm that evening to respond or have my order canceled automatically.
I understand the nature of this rule, but I believe that Dell Inc. is using this to their advantage to keep from having to fulfill orders that they deem unreasonable.
First, I believe that the approximately 12 hours between when I received my second delay notification and the time I needed to contact them to continue my order was unusually short. This second email did not state that I would have the option to cancel up until the time that they ship my PC, if I had agreed to the delay. Because of this, I felt that I was being pressured into making a decision to wait indefinitely for my new PC, or cancel and loose out on the deal that I had waited to find through their web site.
Second, at the time of the second notification, the price for the PC I had ordered went up nearly $400 (per their web site), thus I believe they are using this rule as a way to ensure they maximize profits on each of their sales, by saving the components that would have gone into my PC for another customer who was paying more for it.
I have done business with Dell in the past, and have been very pleased with their products, but the handling of this particular delay, in my opinion, was very unsatisfactory.
My account information with Dell is as follows, if needed: (removed for privacy). Enclosed are my order confirmation, first and second delay notices.

Thank you for your time,
Matthew Walsh

The first thing that I noticed is that you need to be careful to look for the 64-bit downloads for the software that you're installing. I ended up downloading and re-installing things several times after I ran a program and realized that it was running in 32-bit mode.

How can you tell if something is running in 32-bit mode? Open up task manager and look at the processes tab, in the image name column look for a *32 after the name of the file. If it's there, then it is running in 32-bit mode. I've also noticed that programs that run as services, such as backup and AV programs, run their configuration applications in 32-bit mode, but if you look at the all process tab, I've found that the underlying engine that actually does the scanning or backing up runs in 64-bit mode.

Here are some of the programs that I use regularly and their 64-bit status.

• Firefox - The 64-bit version is called "Minefield" You can have this and Firefox installed simultaneously, and they share extensions, preferences, history and cookies. This is convenient so you don't have to maintain two separate copies.
• JungleDisk - You'll need to download the 64-bit version of JungleDisk. Every part of the application runs in 64-bit.
• Adobe Flash - Flash is not yet supported in 64-bit browsers, both Minefield and Internet Explorer. The good news is that it runs just fine in the 32-bit browsers running in Vista 64.
• AVG Anti-Virus - The free version of AVG runs in 65-bit mode. Note that only the scanning engine does this, not the front-end configuration application. Also, there's no need to dig around for a different installer, the 64-bit one is included in the normal Windows installer download.
• Picasa - Picasa does not yet have a 64-bit version for Windows. I have had no problems running the 32-bit version, however.
• GIMP - The GIMP has an experimental 64-bit version. The installer actually requires you to check a box that reads "I promise I won't bother the developers if I can't get this to work" before it lets you install it. I haven't done a lot of work in GIMP yet, but I have yet to run into any problems with it.
• VLC - The free Video Lan Client (VLC) does not have a 64-bit version yet. I have had no problems running the 32-bit version, however.
• Itunes - Itunes has a 64-bit version, you'll need to do some digging to find it through Apple's site. Here's the link to Itunes 8.1, the newest available at the time of this post.

As for drivers, I was able to locate 64-bit drivers for my printer, scanner, bluetooth adapter and video card from their manufacturers' without any problems. All of this hardware is under 3 years old. I would expect some problems finding updated drivers for hardware that is older.

Although it got a bad rap to start, I'm quite impressed with Vista overall. Some of my favorite features that I've found so far include:

• Start menu search - Open the start menu and start typing. Windows will immediately show you what matches your search from both programs on the start menu and your documents folder. If the one at the top of the list is the one you're looking for, just press enter, otherwise select it from the list on the left side of the start menu.
• Windows Flip 3D - Instead of switching between windows using Alt-Tab, try Win-Tab. If you've got Aero Glass Enabled, you'll get a cascaded preview of each open window to flip through. A nice effect, and it can help locate the window you want when you've got a lot of windows open.
• Aero Glass - The top-of-the-line theme for windows. It includes translucent window borders, minimize and maximize animations and glowing window controls. Normally I've immediately turned off all of the eye-candy on a new install of XP, even reverting back to the Windows 2000 style taskbar, but Microsoft got it right this time. The animations and other eye candy do not seem to effect the performance, and with a decent graphics card, are actually handled in the GPU and not in the main processor.
• User Account Control - Although many people are annoyed by just how often this pops up, I find it an excellent tool for securing your computer. The theory behind it is that any time a program wants to make changes to a protected area of the system (install a program for example) Windows will alert you to this and require you to enter the password for the administrator account. This is an excellent way to keep malware from installing itself automatically in the drive-by download fashion. It's unfortunate that so many people turn it off.

High level is what is most common today. This includes languages such as C, Visual Basic, PHP and others. These languages use human-readable elements such as if, then, else, while and return to control the flow of a program. Many of these languages share enough common elements that a programmer familiar with one language can often look at code written in a different language an often have an understanding of what it accomplishes. However, each of these languages is unique and many of them are designed around a particular task or programming concept. A thorough understanding of this underlying concept can help a programmer to make a decision on which language to use to accomplish a particular task.

A graphical language is a high level language that is often represented in a flowchart form to facilitate human readability. Flowcharts are mainly made up of decision branches, and function blocks, not unlike ones that are used to describe a process in a user manual. These languages are typically programmed using drag and drop. Grab the block you need and drop it in the appropriate place on the screen. Each block often has a few parameters associated with it. For example a decision block will have a two input values and a comparison operator, not unlike an if statement in a text based language. From this block you can then branch to a yes or no function block. Function blocks, like decision blocks, also have inputs. A block that performs and addition function, for example, would have two inputs for the values being added, and one output for the result. These languages often become very complex to follow because it is often difficult to place comments within the flowchart structure to help another programmer understand exactly what is happening, unlike comments in a text based program which can be placed nearly anywhere. Additionally, as the program becomes more complex, the flow of the program can become very difficult to follow as it will quickly begin to cover several pages, and connecting blocks between these pages can often be a challenge depending on exact language used.

Another example of a graphical language is ladder logic. It is typically used in industrial control systems, and is based directly on electrical schematics that look a lot like rungs of a ladder. This design was intentional, as an electrician familiar with common electrical symbols could very easily transition to programming in a ladder language, as the symbols and functions of the symbols was essentially the same. Over time, the language has evolved to add instructions and symbols that do not have an electrical counterpart. Ladder based languages also have the distinction of running continuously, unlike the text languages also discussed in this section. Again, this design is intentional as it is modeled after electrical schematics and components, which behave like a continuously running program, as long as the machine is turned on.

Low level languages are ultimately what is run on a processor, and the other two types of languages discussed here are ultimately turned into a low level language before they are executed. Low level languages often use mnemonics that help to make the language readable to programmers. A few lines from a typical low level language might read as follows:

LD A, 10
INC A
JP A,Z

In the above example LD, INC and JP are all opcodes, and are actual instructions that the processor carries out. The values following the opcodes are parameters for each code. In this case A is a register, 10 is a constant and Z is a label to jump to. Each of these opcodes is turned into a binary value that is the actual sequence of bits that the processor must see to carry out the command entered. Even though this has been made easier to read through the use of mnemonics, at first glance it is not entirely clear that this code loads the value 10 into register A, increments the value in A by 1 and then jumps to label Z if A is not zero. Programming in an assembly language requires a good understanding of the actual architecture of the processor, how memory is laid out, what functions it can perform and how to combine the rather primitive functions provided into more common functions such as if-then-else statements.

In event driven code, nothing runs until there is a triggering event. This is often the user clicking a button, pressing a key, following a link on a web site, or it could be a machine generated event, such as data arrives on a port or a set amount of time has elapsed. In any case, once the triggering event happens, a portion of code is executed. In a calculator, for example, when the user presses the equals button, the corresponding portion of the program to add, subtract, multiply or divide is carried out.

Continuously executed programs run every line of code, from top to bottom, and then immediately begin executing at the top again. Every line of code has a distinct output that is updated on a more-or-less continuous basis, as long as the program and processor run sufficiently fast. The most basic type of this program is often referred to as “bit banging” and is often used in the programming of industrial equipment. It is called bit banging because these types of programs look at inputs from multiple single bit sources, often push buttons, position sensors or selector switches and based on the states of these inputs, turn on or off a single bit output. The code can often be broken down into several lines of if-then-else statements such as “if A or B are ON then turn ON C else turn OFF C.”

Interestingly, these two different styles of program execution, even though they are defined by the programming language, can be written in such a way that they behave as they other type of program. Consider the following lines of pseudo-code that are written in an event driven language:

Event (User Click)
While (1)
If A or B Then C Else D
If A and B Then E Else F
End While
End Event

The above program will execute continuously, even though the programming language is event driven. Strictly speaking, this code would “hang” the processor as it would be stuck in an infinite loop that only deals with inputs A and B. In reality, there is a supervisory program (an operating system in a computer, for example) that oversees everything that is going on and will pause the execution of this program and give processing time to other programs to keep everything running as expected.

Like the above example, a continuous execution program can be written to appear to execute as though it were event driven. Here is another pseudo-code example written in a continuous language.

If A then B
If B then C
If C then D

Even though all of these lines of code are executed over and over, the only way to get to D is to first trigger A, which triggers B and so on, in an event driven fashion.

One other interesting note, excluding the newer multi-core processor systems, any given processor can only execute one command at a time, and can only execute commands sequentially. The speed of a processor allows it to appear to handle multiple tasks at one.

The heart of any program is the algorithm that actually performs a task at hand. There are often plenty of auxiliary functions that typically must also occur in a program, but what makes each and every piece of software unique is how these functions are tied together to perform a task. Often the algorithm is the piece of code that requires the most debugging, the most attention to detail, and most importantly, a new and often creative idea. Auxiliary functions frequently are written by a third party, or in the case of many high level languages, may actually be features of the language itself. In PHP, as an example, there are functions available to query a database, write HTTP headers to a browser, read data from a web page or sort an array. All of these functions typically require no more than a line or two of code for them to perform a lot of work more or less automatically.

Let’s apply these functions to a basic model of the Google search engine. Things start off with a web crawler, an auxiliary function that gets a web page. The crawler then finds links on the page, opens them and continues on indefinitely.

The crawler feeds its data to Google’s algorithm called Page Rank. This is the core of their process. It counts up the number of links to a given page, and what context the page is linked to. Note that there are no pre-defined functions to handle this task, thus it is the main algorithm because it contains the new and creative idea mentioned above.

Next we move back to some auxiliary functions. The data that is generated by Page Rank is then stored in a database, another built in function in many programming languages. Then, when a user does a search, the database is queried and returns a response that contains pages that match the user’s input. Finally, this data is then sent to the user’s web browser, all of which can be handled by various functions that are already built into a programming language.

Please understand that this is a very simplified analysis of Google, and it was intentionally designed to show how an algorithm is a small part of an overall program, but is what makes every program unique.

I opted to go with Vista Home Premium and I'll save my money until Windows 7 comes out later this year and upgrade to the highest level then. With the exception of remote desktop, there's nothing that I'll be missing out on by having Home Premium.

I didn't go with top of the line components but close. I do a bit of video editing, a lot of photo editing, and not much gaming. Here are the specs:

• Dell Studio XPS 435MT
• Core i7-920 processor, 2.66GHz, quad core
• 6GB DDR3 1067MHz
• 22" Widescreen Full HD LCD Dell monitor
• ATI Radeon HD4670 with 512MB memory
• 640GB SATA Hard drive, 7200 RPM
• Vista Home Premium 64-bit
• 2-16X DVD+/-RW Drives

This is a major step up from my current 7+ year old system (frequently updated) that I built myself. Current specs are:

• AMD Athlon 1.2GHz
• 1GB PC133
• 17" 4:3 LCD Dell Monitor
• ATI Radeon All-In-Wonder 7500 64MB
• 500GB PATA hard drive, 72oo RPM
• XP Pro 32-bit
• 16X DVD+/-RW Drive
• 52X CD-RW/-RW Drive
• Unidentified burning smell (main reason for upgrade)

Look for my new 64-bit M@'s Picks, and anything else that I learn about taking the step to 64-bit in the next month or two.

Here's where things get scary. A crafty hacker could also potentially break into your Facebook page, blog, or email. Once they have your user name and password, the can get your email address from your account details on Twitter. Then, they can head over to GMail, Hotmail or whoever you're using and try logging in using the same password you use for Twitter. Unfortunately, there's a good chance that this will work since studies have shown that many people use the same password for everything. So how do they get into your blog? If you've linked to your blog in the Web entry on your twitter account, the hacker now knows where your blog is, and they've got a relatively good password to try on it too. The same goes for Facebook, and anything else that you've ever linked to from Twitter, perhaps a Digg page or a MySpace page.

This is all speculation, but if you're using the same passwords for more than one online service, be sure to change all of them if you've been affected by this attack.

Initially intended to be a way to catalog all the ornaments that we have on our tree at home, I've decided to add a few features to it, such as different "trees" that you can browse and opened it up for everyone. Really not much more than a Christmas themed photo gallery, it became my first true adventure into Ajax. You can see this because the page never reloads, and if you're pay close attention, you'll see that only 8 ornaments are loaded at a time into the slider at the top of the page. There's still some work to do on it, here's what I plan to do:

• More trees and ornaments (This will happen when I get photos of all the ornaments on our tree)
• Search
• Tags
• Better back-end interface

Some other changes at the museum include the entire west pavilion being shut down for the construction of the new Science Storms, opening in spring of 2010. That's going to be a rework of the old Hall of Basic Science, with a weather related slant. The centerpiece of it will be a 20' tall tornado. Also, the southern balcony is under construction. The body exhibits are also being reworked and will open next spring.

Also of note was the Mechanical Cabaret Theater. This was a showcase of cam and pulley driven animated scenes. One of my favorites was the cat lapping up poisoned milk, as the sign described it. After about 10 licks the entire wooden cat collapses. In true Museum fashion, the museum inner workings of the display are completely exposed, allowing the curious mind (mine included) to look at what exactly causes all of the motion.

The former Robots and, prior to that, Time exhibit hall now is an exposition of where new technologies may take us. There is a lot of interesting content there, and it looks like they've set it up so they can keep it up to date very easily, which will be critical to keep the information fresh.

Finally, the Omnimax theater refurbishment has been completed. There are new seats in the theater, new carpeting and a DLP projector that displays movie theater-style pre-show questions and answers, instead of the old slide based system. I saw the Grand Canyon Adventure which was excellent, like every Omnimax film. The film was also shot exclusively for Omnimax (or they have outfitted the projector with a lens that corrects for it) as there was no distortion near the edges of the field of vision as I have become accustomed to seeing with Imax films being played on an Omnimax screen. The movie had spectacular views of the canyon from top to bottom. It also included plenty of the Imax signature flying-over-the-edge-of-a-cliff scenes designed to make everyone in the audience jump a little.

That was from the summer of 2002, when I started at Purdue. Then, the site ran on Greymatter and didn't have a photos section. Now, I've upgraded to Wordpress and I'm using Gallery 2 to handle the photos.

About all that made it through the re-design was the backwards "b" logo (short for "by" and styled after the @ symbol) and the content. The tweets and random photos in the old design were added last-minute and didn't fit the available space very well, which is what prompted me to start redesign the site.

I started with a Wordpress theme called Grey Matter (purely coincidence) and customized it to my liking. I then adapted it for use with Gallery 2.

Wordpress was a breeze to customize the theme, Gallery 2 was a little trickier. I feel like all of the documentation for it is not entirely up to date. For a challenge, I threw in some integration between Twitter, Gallery 2 and Wordpress. You can see the results of that in the sidebar at the right with the random photos and recent tweets available on each page.

Something to note with the design, having the links and sidebar to the right make the site much more accessible to small-screen devices, that tend to ignore layouts and just display content top to bottom. With the links at the left, the small-screen user has to scroll past all of them before they get to the page content. I'm noticing a lot of this as I find more and more uses for my new smartphone.

I went to the game anyways because it was #4 vs. my high school at #25. I expected a better game than what I saw. Since I had my phone with me and no camera, I decided to micro-blog the entire game with my commentary and score updates. I also went for the "total experience" and blogged the band and fan reaction. You can find all of that under the "Twitter" link at the left. Whether or not anyone was paying attention to it is another question, but I'm sure someone got some use out of it.

It was a little tricky. Trying to keep to keep track of the next play while typing up the last one on a tiny keyboard. You'll notice some spelling and grammar errors that I blame mostly on this. I thik I got it figured out by then end I was even to get some player names in, picking them up from the field announcer.

Part of the reason I got the phone and data plan was because of the amount of traveling I do for work. Almost immediately I found out just how handy it is. Last week I was able to keep track of the baseball games from factory floors in Dallas and Milwaukee, and from the St. Louis airport. For this, I found Sportsline to work best.

I also use Google reader a lot to keep tabs on news, Digg and a handful of other RSS feeds that I follow. The integration between the full browser app and the mobile one is great. I can flip through my feeds at lunch, read the ones that I want to keep up on and star the remaining ones to look at later that day.

Google Maps has also been great. In addition to the directions it's integrated to your contacts so you can get directions to any contact with an address in your phone book. Also, when looking up a business, the phone number is clickable and puts you right into a call. Finally, the traffic has also helped out, especially when I was in a Dallas and needed to know if I'd be able to make it to my flight.

For instant messenger, I found the free Slick to work best. It does it's best to keep you connected, even after a call. The only gripe that I have is that I would like it to look at the phone's profile (Loud, vibrate…) and adjust its alerts based on that.

I also picked up a Twitter client and I’m going to start using that. You can see my updates from that here. I’m currently looking into two different clients, and I don’t have a favorite yet.

I’ve made my web site mobile friendly. I didn’t do anything special for the blog, just added a Word Press plugin that puts a nice mobile theme in place when viewed from a mobile device. The photos section of the site, however, required a bit of work. I designed my own theme for Gallery2, and put together a few different ideas that I picked up from the support forum to get it to detect mobile devices and change the theme accordingly.

Since then, I've been working in controls engineering. The job entails everything from design, to installation and service. I've got to select parts, be it motors, sensors, fuses, relays that are appropriate for the task at hand. Then draw up the schematics to integrate them into the machine. Next, I write the program that runs the machine, making the right motions happen at the right time to build a particular part. That all happens at our shop. Then, once the customer approves the machine's function, I'll travel with it to their site and set it up again on their floor. This often includes some electrical wiring, and adjusting the program to their specifications after they get used to running the machine for a while.

The travel has been quite fun. There are some days were I'll be asked at 1 in the afternoon, "Can you be in Buffalo at 7 tomorrow morning?" I don't mind this one bit. I'm often going to work on a machine that I haven't seen before, so before I can fix it, I first have to figure out exactly what it should be doing and why it's not. I've traveled from Maryland to Texas, Canada to South Carolina spending 36 nights on the road last year. This has worked quite well for photography that I've gotten into recently.

A roommate that I had in college was the photo editor for Purdue's newspaper, which is where I got my interest in photography. Since I've been working, I've been able to afford more expensive toys. I got myself a new car not too long after starting work, and picked up a digital SLR about 6 months ago. I've had a great time photographing things such as high school football games, marching bands, the Chicago Auto Show, and family and friends during the holidays. One of my favorites was Niagara falls, just a few weeks after I got my camera. It was essentially a free trip for me, since I was in Buffalo for work. It took some trial and error, but I managed to get some excellent photos of it. Since then I've learned a lot about photography. You can see all of my photos in the Photos section of this site.